Freedom Shields
Made in the USA
Start with the measurement guide, then reach out if you need help choosing for your bike and riding position.
During peak riding season, build times may increase with demand.
Couldn't load pickup availability
Direct fit for the 2026–up Street Glide Limited and CVO Street Glide Limited factory tall windshield mounts.
The right windshield height depends on your seated position and how you want to see the road. Freedom Shields offers seven height choices, a wider upper profile, and its AirCurve® recurve to help calm the air around you and your passenger.
This windshield mounts directly to the factory tall windshield mounting system on these models. No additional mounting bracket or conversion kit is required.
The AirCurve® recurve directs airflow approximately 2–3 inches higher than a conventional windshield. That can let you look over a shorter shield while retaining useful highway wind protection. The upper section is also wider than Freedom Shields’ standard Street Glide design, providing more coverage for the rider and passenger.
Each windshield is handcrafted in the USA from high-impact modified acrylic. Freedom Shields builds it thicker than many aftermarket alternatives to reduce flex, then finishes the edges by hand for a clean appearance.
These models use the factory tall windshield mounts. This listing is not for a standard Street Glide with factory short windshield mounts unless that motorcycle has been converted to the compatible Harley tall mounting system. Confirm your exact year, model, and mounting setup before ordering.
Your height and inseam alone cannot tell you which windshield to buy. Your seat, posture, and preferred line of sight change where the top edge sits when you are actually riding.
Start by measuring for a top edge near the tip of your nose while seated normally. This gives you a clear view over the shield while allowing the AirCurve® to direct airflow higher.
For more coverage, the top edge can sit approximately two inches above your normal line of sight. Consider how rain or dirt on the windshield may affect visibility with a taller setup.
The advertised 10–16 inch size is measured along the front center surface of the windshield, from the base to the top edge. To choose your height, use the vertical measurement chart in the product images. Measure straight up from the flat area of the dash in front of the vent to your preferred top-edge position, then compare that measurement with the chart.
If you are between sizes or unsure how to measure, contact us before ordering. We’ll help you work through the measurement rather than guess from rider height.
Available tints vary by size. Tint changes appearance and light transmission; it does not change fitment. Clear and lighter options are easier to see through at night, in rain, and in low light. A darker tint is best considered when the windshield stays below your direct line of sight.
Install the windshield on the factory tall windshield mounts using the appropriate existing hardware. No additional bracket or conversion kit is required for the listed Limited models. Confirm that the shield is aligned and all mounting hardware is secure before riding.
Your Freedom Shields windshield is handcrafted in the USA after the order is placed.
Production can take longer during peak riding season. If you have a trip deadline, contact us before ordering so we can discuss the current timing.
Your windshield arrives with protective film on both sides. Leave the film in place while you install it and check height, line of sight, and fit. You may take a short test ride with the film on if visibility remains safe and unobstructed.
If the height is not right, contact us before returning it. An eligible windshield can be exchanged or returned while it remains like new and the original film has not been removed. We’ll guide you through the process and cover shipping on your first eligible size exchange. Original shipping charges may not be refundable on a return.
A windshield should solve the wind problem you feel on the road, not simply look right in a product photo. Freedom Shields combines a recurve, a wider touring profile, and a real range of sizes. We help you choose from your bike and seated line of sight so you can order with a reason behind the decision.
These are real Freedom Shields owner testimonials
I was dealing with constant helmet shake and wind pressure on the highway. After installing the Freedom Shield, it was a night-and-day difference. The buffeting is basically gone and the air now flows smoothly over my head. I can finally ride at highway speeds without feeling beat up.
The biggest difference for me was the wind noise. With my stock windshield, it was loud and exhausting. With the Freedom Shield, everything is calmer. I can actually hear my speakers and ride longer without fatigue.
I went with a shorter shield than I expected and it works better than my taller stock one. I can see over it clearly, and the air still goes right over my helmet. It’s cleaner airflow, not just blocking wind.
This is one of those upgrades you don’t realize you need until you ride with it. The difference in comfort is huge. No more constant wind pressure or fighting the bike on long rides. I wish I would have done this years ago.
